MIG Welding Wire
Showing 73–96 of 129 results
-
Consumables, MIG Welding Wire
Innershield NR233 1.6mm 11.3kg Flux Cored Welding Wire
AWS: E71T-8-H8, E71T8-A2-CS3-H8
Top Features
- Enhanced Feedability – New design increases wire stiffness to aid feedability and promotes smooth arc transfer
- Wire Snap-Off – Easy to break off wire end without tools for better re-strike
- Meets AWS D1.8 requirements for Demand Critical Welds – Three lot tests available at www.lincolnelectric.com/D1.8 to meet AWS D1.8 lot waiver requirements
- Effortless Operability – Welders of all skill levels benefit from the easy to control arc and forgiving weld puddle even out of position
Typical Applications
- Seismic structural steel erection and fabrication
- General structural steel erection and fabrication
- Ship and barge fabrication
- Vertical up and overhead fillets and groove welds
Welding Positions
All
SKU: LIED031576 -
Consumables, MIG Welding Wire
Innershield NR233 1.8mm 11.3kg Flux Cored Welding Wire
AWS: E71T-8-H8, E71T8-A2-CS3-H8
Top Features
- Enhanced Feedability – New design increases wire stiffness to aid feedability and promotes smooth arc transfer
- Wire Snap-Off – Easy to break off wire end without tools for better re-strike
- Meets AWS D1.8 requirements for Demand Critical Welds – Three lot tests available at www.lincolnelectric.com/D1.8 to meet AWS D1.8 lot waiver requirements
- Effortless Operability – Welders of all skill levels benefit from the easy to control arc and forgiving weld puddle even out of position
Typical Applications
- Seismic structural steel erection and fabrication
- General structural steel erection and fabrication
- Ship and barge fabrication
- Vertical up and overhead fillets and groove welds
Welding Positions
All
SKU: LIED031030 -
Consumables, MIG Welding Wire
Innershield NR311 2.0mm 6.4kg x4 Rolls Flux Cored Welding Wire
AWS: E70T-7, E70T7-AZ-CS3
Top Features
- High deposition rates and fast travel speeds
- Easy slag removal
- Optimal toe wash-in
- Deep penetration
- High resistance to cracking
Typical Applications
- Recommended for fillet, lap and butt welds on 3.2 mm (1/8 in) and thicker steel, including some low alloy steels
- Horizontal butt welds, such as column-to-column structural connections
- General fabrication
- Assembly welding
Welding Positions
Flat and horizontal
SKU: LIED014464 -
Consumables, MIG Welding Wire
Innershield NR311 2.4mm 22.7kg Flux Cored Welding Wire
AWS: E70T-7, E70T7-AZ-CS3
Top Features
- High deposition rates and fast travel speeds
- Easy slag removal
- Optimal toe wash-in
- Deep penetration
- High resistance to cracking
Typical Applications
- Recommended for fillet, lap and butt welds on 3.2 mm (1/8 in) and thicker steel, including some low alloy steels
- Horizontal butt welds, such as column-to-column structural connections
- General fabrication
- Assembly welding
Welding Positions
Flat and horizontal
SKU: LIED012629 -
Consumables, MIG Welding Wire
Lincoln Electric 316LSi Stainless Steel 0.9mm 15kg Wire
AWS: ER316LSI
Top Features
- Precision layer wound
- Suitable for Argon based gases with CO2 and/or O2 additions /
- High silicon for better bead shape and edge wetting/
Typical Applications-
-
- Stainless steel solid wire designed for welding 316 and 316L stainless steels/li>
- Ideal for many fabrication jobs in exhaust pipe, marine, food & beverage, transportation and storage industries
-
Welding Positions
-
-
-
- All, except vertical down
-
-
Shielding Gas
-
-
-
- M12 : Mixed gas Ar+ (>2-5%) CO2
- M13 Mixed gas Ar+ (1-3%)
-
-
-
SKU: LI331069 -
Consumables, MIG Welding Wire
Lincoln Electric 316LSi Stainless Steel 1.2mm 15kg Wire
AWS: ER316LSI
Top Features
- Precision layer wound
- Suitable for Argon based gases with CO2 and/or O2 additions /
- High silicon for better bead shape and edge wetting/
Typical Applications-
-
- Stainless steel solid wire designed for welding 316 and 316L stainless steels/li>
- Ideal for many fabrication jobs in exhaust pipe, marine, food & beverage, transportation and storage industries
-
Welding Positions
-
-
-
- All, except vertical down
-
-
Shielding Gas
-
-
-
- M12 : Mixed gas Ar+ (>2-5%) CO2
- M13 Mixed gas Ar+ (1-3%)
-
-
-
SKU: LI331062 -
Consumables, MIG Welding Wire
Lincoln Electric Ultramag S6 0.8mm 15kg
AWS: ER70S-6
0.8mm 15kg Spool
Top Features
- Precision layer wound
- Suitable for Argon based gases and 100% CO2
- Robust copper coating aids arec starting and extends tip life
Typical Applications
- General fabrication C-Mn steels
- Medium to heavy mill scale base materials
Welding Positions
- All, except vertical down
Shielding Gas
- M21 : Mixed gas Ar+ (>15-25%) CO2
- M22 Mixed gas Ar+ (2-5%) O2
- C1: Active gas 100% C
PART NO: LIAUM0815S6
SKU: LIAUM0815S6 -
Consumables, MIG Welding Wire
Lincoln Electric Ultramag S6 0.8mm 5kg
AWS: ER70S-6
0.8mm 5kg Spool
Top Features
- Precision layer wound
- Suitable for Argon based gases and 100% CO2
- Robust copper coating aids arec starting and extends tip life
Typical Applications
- General fabrication C-Mn steels
- Medium to heavy mill scale base materials
Welding Positions
- All, except vertical down
Shielding Gas
- M21 : Mixed gas Ar+ (>15-25%) CO2
- M22 Mixed gas Ar+ (2-5%) O2
- C1: Active gas 100% C
PART NO: LIAUM0805S6
SKU: LIAUM0805S6 -
Consumables, MIG Welding Wire
Lincoln Electric Ultramag S6 0.9mm 15kg
AWS: ER70S-6
0.9mm 15kg Spool
Top Features
- Precision layer wound
- Suitable for Argon based gases and 100% CO2
- Robust copper coating aids arec starting and extends tip life
Typical Applications
- General fabrication C-Mn steels
- Medium to heavy mill scale base materials
Welding Positions
- All, except vertical down
Shielding Gas
- M21 : Mixed gas Ar+ (>15-25%) CO2
- M22 Mixed gas Ar+ (2-5%) O2
- C1: Active gas 100% C
PART NO: LIAUM0905S6
SKU: LIAUM0915S6 -
Consumables, MIG Welding Wire
Lincoln Electric Ultramag S6 0.9mm 5kg
AWS: ER70S-6
0.9mm 5kg Spool
Top Features
- Precision layer wound
- Suitable for Argon based gases and 100% CO2
- Robust copper coating aids arec starting and extends tip life
Typical Applications
- General fabrication C-Mn steels
- Medium to heavy mill scale base materials
Welding Positions
- All, except vertical down
Shielding Gas
- M21 : Mixed gas Ar+ (>15-25%) CO2
- M22 Mixed gas Ar+ (2-5%) O2
- C1: Active gas 100% C
PART NO: LIAUM0905S6
SKU: LIAUM0905S6 -
Consumables, MIG Welding Wire
Lincoln Electric Ultramag S6 1.2mm 15kg
AWS: ER70S-6
1.2mm 15kg Spool
Top Features
- Precision layer wound
- Suitable for Argon based gases and 100% CO2
- Robust copper coating aids arec starting and extends tip life
Typical Applications
- General fabrication C-Mn steels
- Medium to heavy mill scale base materials
Welding Positions
- All, except vertical down
Shielding Gas
- M21 : Mixed gas Ar+ (>15-25%) CO2
- M22 Mixed gas Ar+ (2-5%) O2
- C1: Active gas 100% C
PART NO: LIAUM1215S6
SKU: LIAUM1215S6 -
Consumables, MIG Welding Wire
Lincoln Electric Ultramag S6 1.2mm 250kg
AWS: ER70S-6
1.2mm 250kg Drum
Top Features
- Precision layer wound
- Suitable for Argon based gases and 100% CO2
- Robust copper coating aids arec starting and extends tip life
Typical Applications
- General fabrication C-Mn steels
- Medium to heavy mill scale base materials
Welding Positions
- All, except vertical down
Shielding Gas
- M21 : Mixed gas Ar+ (>15-25%) CO2
- M22 Mixed gas Ar+ (2-5%) O2
- C1: Active gas 100% C
PART NO: LIAUM12250S6
SKU: LIAUM12250S6 -
Consumables, MIG Welding Wire
Lincore 50 1.6mm 11.3kg Self Shielded Flux Cored Welding Wire
Top Features
- Delivers an abrasion resistant deposit, even under conditions of moderate impact
- Larger wire diameter sizes may be used for the submerged arc process
- Can be used on low carbon, medium carbon, low alloy, manganese and stainless steels
- Limited to 4 layers
Typical Applications
- Crusher rolls
- Dredge cutter teeth
- Ore chute baffles
- Muller plows and tires
- Coal mining cutting teeth
Welding Positions
Flat and horizontal
SKU: LIED031124 -
Consumables, MIG Welding Wire
Omega Flux Cored Gasless 0.8mm 0.9kg Welding Wire
Top Gun Flux Cored Gasless E71T-GS 0.8mm 0.9kg Welding Wire
- A general purpose, all positional, self shielded, flux cored welding wire.
Applications
- For use with welding galvanised and carbon steels, offering low spatter, a smooth arc and minimal spatter removal.
SKU: CWFM085A -
Consumables, MIG Welding Wire
Omega Flux Cored Gasless 0.9mm 0.9kg Welding Wire
op Gun Flux Cored Gasless E71T-GS 0.9mm 0.9kg Welding Wire
- A general purpose, all positional, self shielded, flux cored welding wire.
Applications
- For use with welding galvanised and carbon steels, offering low spatter, a smooth arc and minimal spatter removal.
SKU: CWFM092 -
Consumables, MIG Welding Wire
Outershield 71CX E71T-1H8 1.2mm 13kg Flux Cored Welding Wire
Outershield 71CX E71T-1H8 1.2mm 13kg Flux Cored Welding Wire
Lincoln Outershield 71CX is an all positional rutile based micro-alloyed electrode providing an extremely smooth arc transfer with excellent ease of use.
SKU: LI033602 -
Consumables, MIG Welding Wire
Primacore LW-71 E71T-1H8 1.2MM 15Kg Flux Cored Welding Wire
Top Features
- Excellent mechanical properties
- Slag system provides for puddle support, good wetting, and bead shape in all positions
- Arc action and metal transfer are smooth
- Slag removal is easily achieved with hand tools.
- One sided welding is possible with ceramic backing and will produce excellent results
- Applications include those in general fabrication, ship or barge construction, building or bridge erection, and off-shore industries
- Manufactured under a quality system certified to ISO 9001 requirements
- Drum packaging is available
Typical Applications
PRIMACOREC® LW-71 is a gas shielded, basic-rutile, general purpose, micro alloyed, flux-cored welding wire designed for all position welding of mild steel in applications requiring moderate levels of strength and very good notch toughness. PRIMACOREC® LW-71 should be used with CO2 only.
Welding Positions
All
SKU: LICOPLW71E21B1 -
Consumables, MIG Welding Wire
Primacore LW-71 E71T-1H8 1.6MM 15Kg Flux Cored Welding Wire
Top Features
- Excellent mechanical properties
- Slag system provides for puddle support, good wetting, and bead shape in all positions
- Arc action and metal transfer are smooth
- Slag removal is easily achieved with hand tools.
- One sided welding is possible with ceramic backing and will produce excellent results
- Applications include those in general fabrication, ship or barge construction, building or bridge erection, and off-shore industries
- Manufactured under a quality system certified to ISO 9001 requirements
- Drum packaging is available
Typical Applications
PRIMACOREC® LW-71 is a gas shielded, basic-rutile, general purpose, micro alloyed, flux-cored welding wire designed for all position welding of mild steel in applications requiring moderate levels of strength and very good notch toughness. PRIMACOREC® LW-71 should be used with CO2 only.
Welding Positions
All
SKU: LICOPLW71E61B1 -
Consumables, MIG Welding Wire
Proweld 308LSi Stainless Steel 0.9mm 15kg Wire
308LSi is primarily intended for welding the low carbon 18% Cr / 10% Ni type 304 L austenitic stainless steels. Suitable also for welding normal carbon grade 304 and Nb or Ti stabilised steels (347, 321) provided service temperatures are below 400°C. The higher silicon content gives better arc stability and weld metal flow which improves bead appearance, particularly when dip transfer welding.
Classifications: AWS A5.9 / ER308LSi / EN ISO 14343 / G 19 9 LSi
Part Number: CWS308093
SKU: CWS308093
