Shop
Showing 361–384 of 677 results
-
-
Consumables, MIG Welding Wire
Hobart FabCOR 86R E70C6M 1.2mm Metal Cored Welding Wire
A metal cored wire with a higher deoxidization elements allow this wire to have greater tolerance for mill scale welding applications. Single and multiple pass applications.
High Deposition Rates and Efficiencies
- Virtually no slag coverage
- Outstanding high-production performance
- Smooth arc characteristics
- Low diffusible hydrogen weld deposit
- Low smoke and spatter levels
- Excellent for both CV and pulsed welding
Productivity Gain
- Improves productivity compared to solid wire or flux-cored electrodes
- Reduces clean up time, improves productivity
- Excellent for robotic welding
- Improved operator appeal, assists in maintaining consistent weld quality
- Minimises risk of hydrogen-induced cracking
- Improves operator appeal and productivity
- Promotes versatility in procedure development
SKU: CWFM249412029 -
Consumables, MIG Welding Wire
Hobart Fabshield 21B 1.6mm Self Shielding Flux Cored 15kg Welding Wire
An all positional general purpose, self-shielding, flux cored wire, designed specifically for multi-pass welding of mild steel and galvanised steel up to a maximum of 20mm in thickness.
Typical Applications
For on-site welding applications including farm and rural fabrication, fences, frames and sheds, etc. Other uses include prefabricated steel frame construction, galvanised tank fabrication, repair of trucks, tractors and earth moving equipment.
SKU: CWFMS222119029 -
Consumables, MIG Welding Wire
Innershield NR211 0.9mm 4.5kg Rolls Flux Cored Welding Wire
AWS: E71T-11, E71T11-AZ-CS3
Top Features
- Versatile welding capability on a variety of base materials
- High operator appeal and good bead appearance
- Easy slag removal
- Fast freezing characteristics accommodate poor fit-up
Typical Applications
- Sheet or thin gauge metal
- Galvanized sheet metal
- Robotic/hard automation
- General fabrication
- 5/16″ maximum plate thickness for 0.045″ and smaller diameters
- 1/2″ maximum plate thickness for 0.068 – 3/32″ diameters
Welding Positions
All, except 3/32″ diameter
SKU: LIED016354 -
Consumables, MIG Welding Wire
Innershield NR211 1.2mm 11.3kg Rolls Flux Cored Welding Wire
AWS: E71T-11, E71T11-AZ-CS3
Top Features
- Versatile welding capability on a variety of base materials
- High operator appeal and good bead appearance
- Easy slag removal
- Fast freezing characteristics accommodate poor fit-up
Typical Applications
- Sheet or thin gauge metal
- Galvanized sheet metal
- Robotic/hard automation
- General fabrication
- 5/16″ maximum plate thickness for 0.045″ and smaller diameters
- 1/2″ maximum plate thickness for 0.068 – 3/32″ diameters
Welding Positions
All, except 3/32″ diameter
SKU: LIED030638 -
Consumables, MIG Welding Wire
Innershield NR211 1.2mm 4.5kg Rolls Flux Cored Welding Wire
AWS: E71T-11, E71T11-AZ-CS3
Top Features
- Versatile welding capability on a variety of base materials
- High operator appeal and good bead appearance
- Easy slag removal
- Fast freezing characteristics accommodate poor fit-up
Typical Applications
- Sheet or thin gauge metal
- Galvanized sheet metal
- Robotic/hard automation
- General fabrication
- 5/16″ maximum plate thickness for 0.045″ and smaller diameters
- 1/2″ maximum plate thickness for 0.068 – 3/32″ diameters
Welding Positions
All, except 3/32″ diameter
SKU: LIED016363 -
Consumables, MIG Welding Wire
Innershield NR211 1.7mm 11.3kg Rolls Flux Cored Welding Wire
AWS: E71T-11, E71T11-AZ-CS3
Top Features
- Versatile welding capability on a variety of base materials
- High operator appeal and good bead appearance
- Easy slag removal
- Fast freezing characteristics accommodate poor fit-up
Typical Applications
- Sheet or thin gauge metal
- Galvanized sheet metal
- Robotic/hard automation
- General fabrication
- 5/16″ maximum plate thickness for 0.045″ and smaller diameters
- 1/2″ maximum plate thickness for 0.068 – 3/32″ diameters
Welding Positions
All, except 3/32″ diameter
SKU: LIED030641 -
Consumables, MIG Welding Wire
Innershield NR211 2.0mm 11.3kg Rolls Flux Cored Welding Wire
AWS: E71T-11, E71T11-AZ-CS3
Top Features
- Versatile welding capability on a variety of base materials
- High operator appeal and good bead appearance
- Easy slag removal
- Fast freezing characteristics accommodate poor fit-up
Typical Applications
- Sheet or thin gauge metal
- Galvanized sheet metal
- Robotic/hard automation
- General fabrication
- 5/16″ maximum plate thickness for 0.045″ and smaller diameters
- 1/2″ maximum plate thickness for 0.068 – 3/32″ diameters
Welding Positions
All, except 3/32″ diameter
SKU: LIED030645 -
Consumables, MIG Welding Wire
Innershield NR232 1.7mm 11.3kg Flux Cored Welding Wire
AWS: E71T-8-H16, E71T8-A2-CS3-H16
Top Features
- High deposition rates for out-of-position welding
- Penetrating arc
- Fast freezing, easy to remove slag system
- Meets AWS D1.8 seismic lot waiver requirements
Notes: FEMA 353 and AWS D1.8 structural steel seismic supplement test data can be found at the Lincoln Electric Certificate Center.
Typical Applications
- Structural fabrication, including those subject to seismic requirements
- General plate fabrication
- Hull plate and stiffener welding on ships and barges
- Machinery parts, tanks, hoppers, racks and scaffolding
Welding Positions
All
SKU: LIED030643 -
Consumables, MIG Welding Wire
Innershield NR232 1.7mm 22.68kg Flux Cored Welding Wire
AWS: E71T-8-H16, E71T8-A2-CS3-H16
Top Features
- High deposition rates for out-of-position welding
- Penetrating arc
- Fast freezing, easy to remove slag system
- Meets AWS D1.8 seismic lot waiver requirements
Notes: FEMA 353 and AWS D1.8 structural steel seismic supplement test data can be found at the Lincoln Electric Certificate Center.
Typical Applications
- Structural fabrication, including those subject to seismic requirements
- General plate fabrication
- Hull plate and stiffener welding on ships and barges
- Machinery parts, tanks, hoppers, racks and scaffolding
Welding Positions
All
SKU: LIED012519 -
Consumables, MIG Welding Wire
Innershield NR232 1.7mm 6.12kg x4 Rolls Flux Cored Welding Wire
AWS: E71T-8-H16, E71T8-A2-CS3-H16
Top Features
- High deposition rates for out-of-position welding
- Penetrating arc
- Fast freezing, easy to remove slag system
- Meets AWS D1.8 seismic lot waiver requirements
Notes: FEMA 353 and AWS D1.8 structural steel seismic supplement test data can be found at the Lincoln Electric Certificate Center.
Typical Applications
- Structural fabrication, including those subject to seismic requirements
- General plate fabrication
- Hull plate and stiffener welding on ships and barges
- Machinery parts, tanks, hoppers, racks and scaffolding
Welding Positions
All
SKU: LIED012518 -
Consumables, MIG Welding Wire
Innershield NR232 2.0mm 22.68kg Flux Cored Welding Wire
AWS: E70T-7, E70T7-AZ-CS3
Top Features
- High deposition rates and fast travel speeds
- Easy slag removal
- Optimal toe wash-in
- Deep penetration
- High resistance to cracking
Typical Applications
- Recommended for fillet, lap and butt welds on 3.2 mm (1/8 in) and thicker steel, including some low alloy steels
- Horizontal butt welds, such as column-to-column structural connections
- General fabrication
- Assembly welding
Welding Positions
Flat and horizontal
SKU: LIED012526 -
Consumables, MIG Welding Wire
Innershield NR232 2.0mm 6.12kg Flux Cored Welding Wire
AWS: E71T-8-H16, E71T8-A2-CS3-H16
Top Features
- High deposition rates for out-of-position welding
- Penetrating arc
- Fast freezing, easy to remove slag system
- Meets AWS D1.8 seismic lot waiver requirements
Notes: FEMA 353 and AWS D1.8 structural steel seismic supplement test data can be found at the Lincoln Electric Certificate Center.
Typical Applications
- Structural fabrication, including those subject to seismic requirements
- General plate fabrication
- Hull plate and stiffener welding on ships and barges
- Machinery parts, tanks, hoppers, racks and scaffolding
Welding Positions
All
SKU: LIED012525 -
Consumables, MIG Welding Wire
Innershield NR233 1.6mm 11.3kg Flux Cored Welding Wire
AWS: E71T-8-H8, E71T8-A2-CS3-H8
Top Features
- Enhanced Feedability – New design increases wire stiffness to aid feedability and promotes smooth arc transfer
- Wire Snap-Off – Easy to break off wire end without tools for better re-strike
- Meets AWS D1.8 requirements for Demand Critical Welds – Three lot tests available at www.lincolnelectric.com/D1.8 to meet AWS D1.8 lot waiver requirements
- Effortless Operability – Welders of all skill levels benefit from the easy to control arc and forgiving weld puddle even out of position
Typical Applications
- Seismic structural steel erection and fabrication
- General structural steel erection and fabrication
- Ship and barge fabrication
- Vertical up and overhead fillets and groove welds
Welding Positions
All
SKU: LIED031576 -
Consumables, MIG Welding Wire
Innershield NR233 1.8mm 11.3kg Flux Cored Welding Wire
AWS: E71T-8-H8, E71T8-A2-CS3-H8
Top Features
- Enhanced Feedability – New design increases wire stiffness to aid feedability and promotes smooth arc transfer
- Wire Snap-Off – Easy to break off wire end without tools for better re-strike
- Meets AWS D1.8 requirements for Demand Critical Welds – Three lot tests available at www.lincolnelectric.com/D1.8 to meet AWS D1.8 lot waiver requirements
- Effortless Operability – Welders of all skill levels benefit from the easy to control arc and forgiving weld puddle even out of position
Typical Applications
- Seismic structural steel erection and fabrication
- General structural steel erection and fabrication
- Ship and barge fabrication
- Vertical up and overhead fillets and groove welds
Welding Positions
All
SKU: LIED031030 -
Consumables, MIG Welding Wire
Innershield NR311 2.0mm 6.4kg x4 Rolls Flux Cored Welding Wire
AWS: E70T-7, E70T7-AZ-CS3
Top Features
- High deposition rates and fast travel speeds
- Easy slag removal
- Optimal toe wash-in
- Deep penetration
- High resistance to cracking
Typical Applications
- Recommended for fillet, lap and butt welds on 3.2 mm (1/8 in) and thicker steel, including some low alloy steels
- Horizontal butt welds, such as column-to-column structural connections
- General fabrication
- Assembly welding
Welding Positions
Flat and horizontal
SKU: LIED014464 -
Consumables, MIG Welding Wire
Innershield NR311 2.4mm 22.7kg Flux Cored Welding Wire
AWS: E70T-7, E70T7-AZ-CS3
Top Features
- High deposition rates and fast travel speeds
- Easy slag removal
- Optimal toe wash-in
- Deep penetration
- High resistance to cracking
Typical Applications
- Recommended for fillet, lap and butt welds on 3.2 mm (1/8 in) and thicker steel, including some low alloy steels
- Horizontal butt welds, such as column-to-column structural connections
- General fabrication
- Assembly welding
Welding Positions
Flat and horizontal
SKU: LIED012629 -
Consumables, MIG Welding Wire
Lincoln Electric 316LSi Stainless Steel 0.9mm 15kg Wire
AWS: ER316LSI
Top Features
- Precision layer wound
- Suitable for Argon based gases with CO2 and/or O2 additions /
- High silicon for better bead shape and edge wetting/
Typical Applications-
-
- Stainless steel solid wire designed for welding 316 and 316L stainless steels/li>
- Ideal for many fabrication jobs in exhaust pipe, marine, food & beverage, transportation and storage industries
-
Welding Positions
-
-
-
- All, except vertical down
-
-
Shielding Gas
-
-
-
- M12 : Mixed gas Ar+ (>2-5%) CO2
- M13 Mixed gas Ar+ (1-3%)
-
-
-
SKU: LI331069 -
Consumables, MIG Welding Wire
Lincoln Electric 316LSi Stainless Steel 1.2mm 15kg Wire
AWS: ER316LSI
Top Features
- Precision layer wound
- Suitable for Argon based gases with CO2 and/or O2 additions /
- High silicon for better bead shape and edge wetting/
Typical Applications-
-
- Stainless steel solid wire designed for welding 316 and 316L stainless steels/li>
- Ideal for many fabrication jobs in exhaust pipe, marine, food & beverage, transportation and storage industries
-
Welding Positions
-
-
-
- All, except vertical down
-
-
Shielding Gas
-
-
-
- M12 : Mixed gas Ar+ (>2-5%) CO2
- M13 Mixed gas Ar+ (1-3%)
-
-
-
SKU: LI331062
